G&W Electric’s Sodertite Terminations are high quality, factory sealed cable terminations designed for maximum reliability. They feature exclusive metal-to-porcelain soldered joints which eliminates the need for gaskets and reduces installation time. Since their introduction in 1940, Sodertite terminations continue to prove the superiority of their design in an increasing number of field installations. The terminations will accept low pressure oil and gas filled cables as well as all extruded dielectric and paper insulated single and three conductor cables on distribution systems up to 46kV. Sodertite terminations are designed and tested in accordance with IEEE-48, 1975 standards for Class 1 terminations.
Features and Benefits
Maximum external insulation - The highest grade, wet process porcelain provides excellent mechanical strength and electrical characteristics. The large diameter, petticoat design combined with an external conducting glaze between the bottom petticoat.
Reliable stress control - Stress relief cone kits consisting of insulating tapes and shielding braid are available as an insulating medium depending upon the application.
|Current rating||Same as cable||Same as cable||Same as cable||Same as cable||Same as cable|
|1 minute dry, ac (kV)||50||65||90||120||175|
|6 hour dry, ac (kV)||35||55||75||100||120|
|10 second wt, ac (kV)||45||60||80||100||145|
|15 minute dry, dc (kV)||75||105||140||170||245|
|Style 4 Clamp Type|
|Style 8 Vertical 4 Hole Flat Pad|
|Style 18 Horizontal Flat Pad|
|Novoid||Novoid A||Novoid X||Novoid 224|